Asphalt AggregatesAsphalt Aggregates

HL8 Stone

A minus 25mm (1″) to 5mm (3/16″) screened material that is a proper blend of 19mm (3/4″) Clear, 13mm (1/2″) Clear and 7mm (1/4″) Clear products. When this material is blended with sand and asphalt cement it produces a base course of Asphalt for roads and parking lots.


HL4 Stone

A minus 16 mm (5/8″) to 4.75 mm (3/16″) screened material that is a proper blend of 16mm (5/8″) Clear and 7 mm (¼”) Clear products. When this material is blended with sand and asphalt cement it produces a heartier top wearing course of Asphalt for roads and parking lots.


HL3 Stone

A minus 16mm (5/8″)” to 5mm (3/16″) screened material that is a proper blend of 16mm (5/8″) and 5mm (3/16″) clear products.  When this material is blended with sand and asphalt cement it produces either a top or base course of asphalt for roads and parking lots.


7 mm (1/4”) Clear Stone

Also known as stone dust or Screening, this material is a minus 7 mm (1/4”) product that is useful blend material in the production of Hot Mix Asphalt.


Manufactured Sand

A proper blend of sand sized particles ranging from 4.75 mm to 75 um; this material is the fine aggregate component in the production of High Stability Asphalt mixes.


Natural Asphalt Sand

A proper blend of sand sized particles ranging from 4.75 mm to 75 um.  This product is the fine aggregate component in the production of Asphalt mixes. Available at Edgar and Anten Mills locations only.