Products HeaderGranulars

100 mm (4”) Crusher Run

This is a minus 100mm (4″) fairly well graded crushed material that can be compacted.  100mm (4″) Crusher Run is a cost effective way for filling large voids to sub-base grade.


50mm (2”) Crusher Run

Also referred to as Granular “B”, this is a minus 50mm (2″) well graded crushed material that can be compacted.  50mm (2″) crusher run acts as a sub-base material for roads and parking lots.


Type 1 B Gravel

A mixture of Sand and Gravel screened to be less than 150 mm (6”) that does not require crushing.  Type 1 B Gravel acts as a sub-base material for roads and parking lots.Available at Edgar and Anten Mills locations only.



19mm (3/4”) Crusher Run

Also referred to as Granular “A”, this is a minus 25mm (1″) well graded crushed material that can be compacted. 19mm (3/4″) is used above the sub-base layer as a load bearing and strengthening component of the road or parking lot.


19 mm (3/4”) A Gravel

A well graded mixture of Sand and Crushed Gravel screened to be less than 25.0 mm (1”).  This product is used above the sub-base layer as a load bearing and strengthening component of a road base or parking lot. Available at Edgar and Anten Mills locations only.



16mm (5/8”) Crusher Run

Also referred to as Granular “M”, this is a minus 16mm (5/8″) material primarily used for shouldering, finish grading and driveways.


Screenings

This material is all fines less than 7 mm and is mostly used for a paving stone leveling course, horse tracks, recreational surfaces, driveway surfaces and pathway surfaces. Screenings can also be used as the fine aggregate for hot-mix asphalt.